 |
|
Aluminum, which is one of the most basic raw materials used in the production of the cables and conductors with copper, is produced in the new facilities established by HES Kablo in the Kayseri Industrial Park.
Producing the aluminum wire-rods in the HES facilities ensures that keeping the quality of aluminum completely under control as it is in copper and minimizing the dependence to the external factors to the lowest possible levels. Production is carried out by converting the aluminum ingots in to wire rods through the continuous casting technique. The aluminum wire-rods thus produced offer the highest quality in cables and overhead conductors with their excellent mechanical and electrical properties.
Product
Aluminum Wire-rod
Diameter
9.5±0.5 and 12±0.5 mm
Packaging
The aluminum wire-rods are wound in large coils, tied with plastic tapes and presented to our customers on wooden pallets
Weight
2000 kg ± 10%
Guaranteed Chemical Analysis:
EN AW 1370 (EAI 99.7)
| Al(%) | Fe(%) | Si(%) | Cu(%) | Zn(%) | Ti(%) | Mn(%) | Mg(%) | Cr(%) | B(%) |
| (Min) | (Max) | (Max) | (Max) | (Max) | (Max) | (Max) | (Max) | (Max) | (Max) |
| 99,7 | 0,20 | 0,10 | 0,020 | 0,040 | 0,010 | 0,010 | 0,020 | 0,010 | 0,020 |
Mechanical and Electrical Properties:
|
Description |
Hardness |
Resistance (Mpa) |
Rresistivity (mΩ.mm²/m) |
Conductivity (%IACS) |
|
EN AW 1370 (AA 1370) |
H11 |
80-95 |
27.85 |
61.90 |
|
H12 |
95-110 |
28.01 |
61.55 |
|
|
H13 |
105-120 |
28.01 |
61.55 |
|
|
H14 |
115-130 |
28.01 |
61.55 |